Stainless Steel Screw Set with Hex Key Set for Crosman 2240 2300 1322 1377 etc.

Description

Visit My eBay Store: AlchemyAirWerks
New COMPLETE Stainless Steel Screw Set
PLUS the GoldGuard Hex Key Set for All these Hex Screws
for Crosman 2240, 2250, 2300, 2400,
1322, 1377, 1740 Air Guns (pellet pistols, carbines).
This is a COMPLETE stainless set for your 22xx family CO2 gun OR your 13xx family pump air gun.
This listing also includes the four (4) hex keys that will drive all of the hex screws and grubs of this complete package plus the tiny .050 that will fit your stock breech screw that is not included in this screw set.  Very high quality hex keys, too!
If you have a standard breech and sight, you need one length at the rear breech screw.  If you have the steel breech you need another length.  I have you covered. I include one (1) each of both the screws!
If you have the CO2 gun, you will need the screw that pins the valve at the tube.  I include one (1) each of that screw.  If you have a pumper you will not need it.
I include three (3) of the screws needed for your trigger frame cover.  If you have an older gun, you may only need two of them.
Included are two (2) grip screws.
You also get one (1) each of the frame-to-tube screws (front and back).
You get four (4) nylon washers in case you have any slop in your trigger and/or in your sear.
Lets not forget the grub set screws! You get three (3) of these... two for the barrel band (22xx CO2 guns need them) and one for the barrel set location on the steel breech you might have. You may need all three, or one or two or none, but I have you covered!
My goal is to give you a set that HAS YOU COVERED for any of the 22xx/13xx and breech combinations normally found.  Isn't it better to have too much (in some cases) than not enough?  And at a better price, too!
All are hex heads except for the front and rear trigger frame screws.  Why are they different?  On purpose (command decision here) they are #2 Phillips head drive.  Both face downward, so looks are not the issue.  I build and disassemble all the time and I find that I prefer removing and assembling these with a long thin #2 phillips screwdriver (I also wrap the shaft with blue tape) so that I am much less likely to scratch or touch the trigger frame.
With every order, I will ship same day or the next business day.
Y
our order will have a tracking number as well.
Feel free to email me any questions you may have.
Please bid confidently.
Excellent customer service has always been my most important goal.
My feedback backs that up (and will continue to).
_____________________________________________
This is an Approved Item for sale per eBay Policy:
*** PLEASE DO NOT REMOVE THIS LISTING ***
This Item is for Air Gun Use Only... Not for Firearms
_____________________________________________