-40%

SCHWINN HURET 27/28" BICYCLE SPEEDOMETER BIKE WHEEL SPEEDO HUB DRIVE KIT

$ 15.81

Availability: 100 in stock
  • Return shipping will be paid by: Seller
  • Custom Bundle: No
  • Item must be returned within: 30 Days
  • Modified Item: No
  • Wheel Size: 27" / 28" (bolt-on axle)
  • Restocking Fee: No
  • MPN: 08 465 / 08465
  • All returns accepted: Returns Accepted
  • Country/Region of Manufacture: France
  • Refund will be given as: Money Back
  • Condition: Please see photos and description below for full details
  • Vintage: Yes
  • Type: Speedometer
  • Brand: Schwinn Approved / Huret / Transval

    Description

    This is a clean used
    example of a vintage Huret speedometer drive, Schwinn
    part number 08 465,
    for 27" or 28" front wheels
    with bolt-on axles
    (not quick-release hub skewers), a nice long-arm example
    with black dust cap, cleaned, repacked and in good working order. Its drive ratio is 1:2.2.
    This drive is compatible with the chrome Schwinn Approved Huret speedometers and drive cables (not included; see my other auctions for examples of those), as well as Huret-branded bicycle speedometers. Although these were labeled for Schwinn as 27" hubs, Huret-branded versions of this same part, with the same output ratio, were certified for either 27" or 28" by the factory. (It does not fit the large, round, 3"-diameter Stewart-Warner speedometers.)
    The two drive arms have a 4¾" (120mm) span, each extending 2 3/8" from the center of the axle hole. I'm also including an accessory hardware kit, containing:
    One 3/8" axle bushing
    (New)
    Four installation washers,
    to
    be used to clear either the inner face of the front fork or the axle cone nut, as needed
    (New)
    One foam dust ring seal
    (New)
    If you need a 5/16" bushing instead, let me know at payment time and I will swap in that bushing in place of the 3/8" size. The axle hole in the center is 7/16" diameter.
    This is a vintage used piece in clean condition.
    I packed it with some fresh grease, and it turns smoothly.
    I am also including a free scanned reprint of an original instruction sheet to help you get it all
    installed.
    NOTES:
    This is not for quick-release front hubs.
    This is only for bicycles with bolt-on front axles.
    This is not for Stewart-Warner speedometers.
    This is a Huret speedometer part.
    This auction is for the drive hub, bushing and washer kit only.
    If you do not see it in the photos, it is not included!
    Free Shipping applies to domestic (U.S.) First Class mail only.
    See the Shipping and Handling section of this listing for all rates, including international Shipping charges. Please be sure you know the Shipping charge to your address
    before
    bidding or buying. Import duties, taxes and charges are not included in the item price or shipping cost. You will need to pay these charges to your post office. (They are not charges from me.) These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.
    Sorry, we do not understate package value, or mark it as a Gift.
    See my other auctions for more vintage Schwinn speedometer items! Except where noted, combined shipping is available for all items ending on the same evening.
    Please do not copy any part of this listing without permission.